50 Watt Plexi Replica Based on Model 1987 of late 1960s Custom made cab in Red Levant with Gold Piping. Other color options available. Contact me if you have an interest. Will build you one for $1,195 plus shipping.	HEAR DEMO OF THE 50 WATT REPLICA BY KENNY. KENNY SENT ME A LINK TO DOWNLOAD A YOUTUBE VIDEO OF HIS DEMONSTRATION OF THE AMP'S TONE. I CANNOT FIGURE OUT HOW TO CREATE A LINK TO IT, BUT HERE'S THE ADDRESS: http://www.youtube.com/watch?v=FJQ-dewo17k Or search Youtube for Edgefield Amps, and look for the clip tittled:  "Edgefield Amps '68 plexi clone "
This amp featured used but very strong Philips Mullard EL34 power tubes. The three 12AX7 tubes were new, premium grade Tung-Sol tubes. Killer tone.	Amp is epuiped with three 5O/50 MFD 500V German filter caps, wired in a five stage power supply arrangement.
Another view of the heart of this fine amp. Note the industrial strength BIAS control circuit.	There is a 3 Amp Main fuse and a 1/2 Amp power supply fuse. You also have a speaker impedance selector for 4, 8, or 16 Ohms. There is a main and external speaker jack. The main jack's switching lug runs to ground through a 470 Ohm 2 watt resistor to provide temporary protection to the output stage if you fire up the amp without connecting to a speaker load.
I built this one with a Mercury Magnetics Output Transformer, and you can really hear the difference! They are not cheap but well worth the investment.